Lockout Tagout (LOTO) - Knowledge Center

Welcome to the Lockout/Tagout (LOTO) Knowledge Center. Why do you need to be concerned about LOTO? Employees can be seriously or fatally injured if machinery they service or maintain unexpectedly energizes, starts up, or releases stored energy. OSHA's standard on the Control of Hazardous Energy (Lockout/Tagout), found in Title 29 of the Code of Federal Regulations (CFR) Part 1910.147, spells out the steps employers must take to prevent accidents associated with hazardous energy. Practicing LOTO not only provides workers with protection from industrial machinery, but also protects your company from extensive OSHA fines that can be detrimental to company reputation and finances.

Featured Lockout Tagout (LOTO) Articles

Featured Lockout Tagout (LOTO) Q&A

Lockout Tagout (LOTO) Safety Meeting Topics

Lockout Tagout (LOTO) Webinars

Properly Controlling Hazardous Energy with Correct LOTO TrainingWhy do I need to be concerned about Lockout Tagout (LOTO)? Employees can be seriously or fatally injured if machinery they service or maintain unexpectedly energizes, starts (more...)

What’s in, what’s out, what’s new, and what’s neededIn 1993 OSHA enacted 29 CFR 1910.146 “Permit-Required Confined Spaces.” In 2015, a major new confined space regulation, 1926 Subpart AA, expanded (more...)

Lockout Tagout (LOTO) Terms

More Lockout Tagout (LOTO) Content

Best practices with rubber insulating gloves


Rubber insulating products protect workers from potentially fatal electric hazards. Follow these best practices when using them.

The PPE workers need before they entert


Confined spaces are inherently risky, so entering one requires a lot of PPE. Find out what gear workers need to safely enter and work in a confined space.

Arc flash


Arc flash PPE isn't perfect - but it can be better. Find out why you don't have to put up with the most common arc flash gear problems.

Emergency Response Situations: Common Scenarios to Be Prepared For


Emergencies are always unexpected, but that doesn't mean you can't prepare. Find out how to be ready for common emergencies.

Working with Hydrogen Sulfide


Working with hydrogen sulfide is hazardous and can be fatal. Find out what you need to do to stay safe.

Why You Should Give More Thought to Rubber Insulating PPE


Rubber insulating PPE gets too little attention. Learn about how it can save lives and how to equip your workers properly.

Confined Spaces in Construction


Confined spaces on construction sites need to be approached with special care. Find out what you need to know to keep workers safe and stay compliant.

Lockout Tagout: 6 Essential Elements


How good is your lockout tagout program? Make sure it includes these six elements.

What You Should Know About Using Calibration Gases


A poorly calibrated gas detector can put workers at risk. Learn more about calibration gases and how they could save your life.

7 Steps to Safely Analyzing Power Quality


Analyzing your power quality can be worth your while, but it needs to be done safely. Find out how to reduce your risks.

7 Things to Consider Before Entering a Confined Space


A lot of planning needs to take place before anyone should enter a confined space. Before getting to work, start with these 7 considerations.

Working in Confined Spaces? You Need the Right Training


Working in confined spaces requires specific training. Here's the need-to-know before entering a confined space.

Electrical Risk Assessments


Mitigating risk in the workplace begins with a thorough risk assessment. Learn what components are crucial to an effective risk assessment and how to implement risk...

Stay Safe and Celebrate Electrical Safety Month


Electrical safety is important both at home and at work. Learn what hazards lurk in unsuspecting places and how you can protect against common fire hazards.

Electricity in the Workplace: The Silent Killer


How to protect yourself and your employees from the invisible workplace hazard of electricity.

What is a hazardous combustible gas atmosphere?


In order for an atmosphere to be capable of burning explosively, four conditions must be met.Adequate oxygenAdequate fuelA source of ignitionSufficient molecular energy...

Lockout tagout for forklift maintenance


Before we talk about when you should lockout a forklift, let’s discuss what the term even means.Locking Out a ForkliftLockout/tagout refers to the practices and...

What is a permit required confined space (PRCS)?


Many confined spaces are associated with serious safety hazards, and require special procedures to ensure worker safety.According to 29 CFR 1910.146, a permit-required...

What kinds of sensors are used to detect LEL combustible gas?


Confined space instruments almost always include a sensor used to measure percent LEL combustible gas. There are two types of widely used LEL sensors; catalytic...

Oxygen enrichment in confined spaces


The concentration of oxygen in confined spaces is a concern from two standpoints. Too little oxygen can cause asphyxiation. Excessively high or "enriched" levels of...

What combustible gases are associated with confined spaces?


Combustible gases and vapors can be produced by materials used or stored in confined spaces, as well as natural processes. The most common combustible gas found in...

Know the difference between AR and FR clothing


The world of PPE can be confusing, and it's not always easy to choose the right gear for a particular application. But when it comes to flame and arc flash resistant...

When you need FR coveralls


While engineering and administrative controls should always be your first line of defense against workplace hazards, PPE is an essential part of keeping workers safe....

Is testing rubber insulating gloves worth the money?


The short answer is “How do you know that it will save your life?”The longer answer is that there are regulations and standards that require certain electrical...

What should be included in a lockout procedure?


OSHA’s lockout standard 1910.147(c)(4)(i) requires that employers have machine-specific lockout tagout procedures for equipment. To help employees effectively perform...

How much voltage protection is needed for safety gloves used in electrical work?


The first defense against most hazards, safety gloves can protect against everything from cuts to chemical burns. When it comes to electrical work, you can’t be too...

What types of gas should I watch out for when working in a confined space?


Due to their nature, confined spaces are inherently dangerous areas to work in. Potential risks in confined spaces are numerous and include fire hazards, noise,...

What is the best kind of gas detector to use in confined spaces?


It can only take seconds to succumb to a hazardous atmosphere in a confined space. That’s why investing in high quality gas detectors is one of the most important steps...

What is the greatest challenge facing utilities providers regarding worker safety, and how can they overcome it?


One of the greatest challenges facing utilities providers is the fact that much of the infrastructure for energy distribution is old and in need of repair or upgrades....